How to Debug a Node.js Application: Tips, Tricks and Tools

  • Satish 

What is Debugging?

Debugging is the black art of fixing software defects. Fixing a bug is often easy — a corrected character or additional line of code solves the problem. Finding that bug is another matter, and developers can spend many unhappy hours trying to locate the source of an issue. Fortunately, Node.js has some great tools to help trace errors.


Debugging has its own selection of obscure jargon, including the following:

Term Explanation
breakpoint the point at which a debugger stops a program so its state can be inspected
debugger a tool which offers debugging facilities such as running code line by line to inspect internal variable states
feature as in the claim: “it’s not a bug, it’s a feature”. All developers say it at some point during their career
frequency how often or under what conditions a bug will occur
it doesn’t work the most-often made but least useful bug report
log point an instruction to a debugger to show the value of a variable at a point during execution
logging output of runtime information to the console or a file
logic error the program works but doesn’t act as intended
priority where a bug is allocated on a list of planned updates
race condition hard-to-trace bugs dependent the sequence or timing of uncontrollable events
refactoring rewriting code to help readability and maintenance
regression re-emergence of a previously fixed bug perhaps owing to other updates
related a bug which is similar or related to another
reproduce the steps required to cause the error
RTFM error user incompetence disguised as a bug report, typically followed by a response to “Read The Flipping Manual”
step into when running code line by line in a debugger, step into the function being called
step out when running line by line, complete execution of the current function and return to the calling code
step over when running line by line, complete execution of a command without stepping into a function it calls
severity the impact of a bug on system. For example, data loss would normally be considered more problematic than a UI issue unless the frequency of occurrence is very low
stack trace the historical list of all functions called before the error occurred
syntax error typographical errors, such as console.lug()
user error an error caused by a user rather than the application, but may still incur an update depending on that person’s seniority
watch a variable to examine during debugger execution
watchpoint similar to a breakpoint, except the program is stopped when a variable is set to a specific value

How to Avoid Bugs

Bugs can often be prevented before you test your application …

Use a Good Code Editor

A good code editor will offer numerous features including line numbering, auto-completion, color-coding, bracket matching, formatting, auto-indentation, variable renaming, snippet reuse, object inspection, function navigation, parameter prompts, refactoring, unreachable code detection, suggestions, type checking, and more.

Node.js devs are spoiled for choice with free editors such as VS CodeAtom, and Brackets, as well as plenty of commercial alternatives.

Use a Code Linter

A linter can report code faults such as syntax errors, poor indentation, undeclared variables, and mismatching brackets before you save and test your code. The popular options for JavaScript and Node.js include ESLintJSLint, and JSHint.

These are often installed as global Node.js modules so you can run checks from the command line:

eslint myfile.js

However, most linters have code editor plugins, such as ESLint for VS Code and linter-eslint for Atom which check your code as you type:

ESLint for VS Code

Use Source Control

A source control system such as Git can help safe-guard your code and manage revisions. It becomes easier to discover where and when a bug was introduced and who should receive the blame! Online repositories such as GitHub and Bitbucket offer free space and management tools.

Adopt an Issue-tracking System

Does a bug exist if no one knows about it? An issue-tracking system is used to report bugs, find duplicates, document reproduction steps, determine severity, calculate priorities, assign developers, record discussions, and track progress of any fixes.

Online source repositories often offer basic issue tracking, but dedicated solutions may be appropriate for larger teams and projects.

Use Test-driven Development

Test-driven Development (TDD) is a development process which encourages developers to write code which tests the operation of a function before it’s written — for example, is X returned when function Y is passed input Z.

Tests can be run as the code is developed to prove a function works and spot any issues as further changes are made. That said, your tests could have bugs too …

Step Away

It’s tempting to stay up all night in a futile attempt to locate the source of a nasty bug. Don’t. Step away and do something else. Your brain will subconsciously work on the problem and wake you at 4am with a solution. Even if that doesn’t happen, fresh eyes will spot that obvious missing semicolon.

Node.js Debugging: Environment Variables

Environment variables that are set within the host operating system can be used to control Node.js application settings. The most common is NODE_ENV, which is typically set to development when debugging.

Environment variables can be set on Linux/macOS:


Windows cmd:

set NODE_ENV=development

Or Windows Powershell:


Internally, an application will enable further debugging features and messages. For example:

// is NODE_ENV set to "development"?
const DEVMODE = (process.env.NODE_ENV === 'development');

if (DEVMODE) {
  console.log('application started in development mode on port ${PORT}');

NODE_DEBUG enables debugging messages using the Node.js util.debuglog (see below), but also consult the documentation of your primary modules and frameworks to discover further options.

Note that environment variables can also be saved to a .env file. For example:


Then loaded using the dotenv module:


Node.js Debugging: Command Line Options

Various command-line options can be passed to the node runtime when launching an application. One of the most useful is --trace-warnings, which outputs stack traces for process warnings (including deprecations).

Any number of options can be set, including:

  • --enable-source-maps: enable source maps (experimental)
  • --throw-deprecation: throw errors when deprecated features are used
  • --inspect: activate the V8 inspector (see below)

By way of an example, let’s try to log the crypto module’s DEFAULT_ENCODING property, which was deprecated in Node v10:

const crypto = require('crypto');

function bar() {

function foo(){


Now run this with the following:

node index.js

We’ll then see this:

(node:7405) [DEP0091] DeprecationWarning: crypto.DEFAULT_ENCODING is deprecated.

However, we can also do this:

node --trace-warnings index.js

That produces the following:

(node:7502) [DEP0091] DeprecationWarning: crypto.DEFAULT_ENCODING is deprecated.
    at bar (/home/Desktop/index.js:4:22)
    at foo (/home/Desktop/index.js:8:3)
    at Object.<anonymous> (/home/Desktop/index.js:11:1)
    at Module._compile (internal/modules/cjs/loader.js:1151:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:1171:10)
    at Module.load (internal/modules/cjs/loader.js:1000:32)
    at Function.Module._load (internal/modules/cjs/loader.js:899:14)
    at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:71:12)
    at internal/main/run_main_module.js:17:47

This tells us that the deprecation warning comes from the code in line 4 (the console.log statement), which was executed when the bar function ran. The bar function was called by the foo function on line 8 and the foo function was called on line 11 of our script.

Note that the same options can also be passed to nodemon.

Console Debugging

One of the easiest ways to debug an application is to output values to the console during execution:

console.log( myVariable );

Few developers delve beyond this humble debugging command, but they’re missing out on many more possibilities, including these:

console method description
.log(msg) output a message to the console
.dir(obj,opt) uses util.inspect to pretty-print objects and properties
.table(obj) outputs arrays of objects in tabular format
.error(msg) output an error message
.count(label) a named counter reporting the number of times the line has been executed
.countReset[label] resets a named counter
.group(label) indents a group of log messages
.groupEnd(label) ends the indented group
.time(label) starts a timer to calculate the duration of an operation
.timeLog([label] reports the elapsed time since the timer started
.timeEnd(label) stops the timer and reports the total duration
.trace() outputs a stack trace (a list of all calling functions)
.clear() clear the console

console.log() accepts a list of comma-separated values. For example:

let x = 123;
console.log('x:', x);
// x: 123

However, ES6 destructuring can offer similar output with less typing effort:

// { x: 123 }

Larger objects can be output as a condensed string using this:

console.log( JSON.stringify(obj) );

util.inspect will format objects for easier reading, but console.dir() does the hard work for you.

Node.js util.debuglog

The Node.js util module offers a built-in debuglog method which conditionally writes messages to STDERR:

const util = require('util');
const debuglog = util.debuglog('myapp');

debuglog('myapp debug message [%d]', 123);

When the NODE_DEBUG environment variable is set to myapp (or a wildcard such as * or my*), messages are displayed in the console:

NODE_DEBUG=myapp node index.js
MYAPP 9876: myapp debug message [123]

Here, 9876 is the Node.js process ID.

By default, util.debuglog is silent. If you were to run the above script without setting a NODE_DEBUG variable, nothing would be output to the console. This allows you to leave helpful debug logging in your code without cluttering the console for regular use.

Debugging with Log Modules

Third-party logging modules are available should you require more sophisticated options for messaging levels, verbosity, sorting, file output, profiling, and more. Popular options include:

Node.js V8 Inspector

In the following sections, the pagehit project developed in other tutorials is used to illustrate debugging concepts. You can download it with:

git clone

Or you can use any of your own code.

Node.js is a wrapper around the V8 JavaScript engine which includes its own inspector and debugging client. To start, use the inspect argument (not to be confused with --inspect) to start an application:

node inspect ./index.js

The debugger will pause at the first line and display a debug> prompt:

< Debugger listening on ws://
< For help, see:
< Debugger attached.
Break on start in index.js:7
  5 const
  6   // default HTTP port
> 7   port = 3000,
  9   // Node.js modules

You can step through the application by entering:

  • cont or c: continue execution
  • next or n: run the next command
  • step or s: step into a function being called
  • out or o: step out of a function and return to the calling command
  • pause: pause running code

Other options include:

  • watching variable values with watch('myvar')
  • setting breakpoints with the setBreakpoint()/sb() command (it is usually easier to insert a debugger; statement in your code)
  • restart a script
  • .exit the debugger (the initial . is required)

If this sounds horribly clunky, it is. Only use the built-in debugging client when there’s absolutely no other option, you’re feeling particularly masochistic, and you’re not using Windows (it’s often problematic).

Node.js Debugging with Chrome

The Node.js inspector (without the debugger client) is started with the --inspect flag:

node --inspect ./index.js

Note: nodemon can be used instead of node if necessary.

This starts the debugger listening on, which any local debugging client can attach to:
Debugger listening on ws://

If you’re running the Node.js application on another device or Docker container, ensure port 9229 is accessible and grant remote access using this:

node --inspect= ./index.js

Alternatively, you can use --inspect-brk to set a breakpoint on the first statement so the application is paused immediately.

Open Chrome and enter chrome://inspect in the address bar.

Chrome inspect

Note: if the Node.js application does’t appear as a Remote Target, ensure Discover network targets is checked, then click Configure to add the IP address and port of the device where the application is running.

Click the Target’s inspect link to launch DevTools. It will be immediately familiar to anyone with browser debugging experience.

Chrome DevTools

The + Add folder to workspace link allows you to select where the Node.js files are located on your system, so it becomes easier to load other modules and make changes.

Clicking any line number sets a breakpoint, denoted by a green marker, which stops execution when that code is reached:

Chrome DevTools breakpoint

Variables can be added to the Watch pane on the right by clicking the + icon and entering their name. Their value is shown whenever execution is paused.

The Call Stack pane shows which functions were called to reach this point.

The Scope pane shows the state of all available local and global variables

The Breakpoints pane shows a list of all breakpoints and allows them to be enabled or disabled.

The icons above the Debugger paused message can be used to resume execution, step over, step into, step out, step through, deactivate all breakpoints, and pause on exceptions.

Node.js Debugging with VS Code

VS Code Node.js debugging can be launched without any configuration when you’re running a Node.js application on your local system. Open the starting file (typically index.js), activate the Run and Debug pane, and click the Run and Debug Node.js (F5) button.

VS Code debugger

The debugging screen is similar to Chrome DevTools with a VariablesWatchCall stackLoaded scripts, and Breakpoints list.

VS Code breakpoint

A breakpoint can be set by clicking the gutter next to the line number. You can also right-click.

VS Code breakpoint options

With this right-click, you can set the following:

  1. A standard breakpoint.
  2. A conditional breakpoint which stops when criteria are met — for example, count > 3.
  3. A logpoint, which is effectively console.log() without code! Any string can be entered with expressions denoted in curly braces — for example, {count} to display the value of the count variable.
  1. VS Code logpoint

Note: don’t forget to hit Return for VS Code to create your conditional breakpoint or logpoint.

The debugging icon bar at the top can be used to resume execution, step over, step into, step out, restart, or stop the application and debugging. Identical options are also available from the Debug item in the menu.

Advanced Debugging Configuration

Further configuration is required when you’re debugging a remote service or need to use different launch options. VS Code stores launch configurations in a launch.json file generated inside the .vscode folder within your project. To generate or edit the file, click the cog icon at the top right of the Run and Debug pane.

VS Code launch configuration

Any number of configuration settings can be added to the configurations array. Click the Add Configuration button to choose an option. VS Code can either:

  1. launch a process using Node.js itself, or
  2. attach to a Node.js inspector process, perhaps running on a remote machine or Docker container

In the example above, a single Nodemon launch configuration has been defined. Save launch.json, select nodemon from the drop-down list at the top of the Run and Debug pane, and click the green start icon.

VS Code launch

Other Node.js Debugging Tools

The Node.js Debugging Guide provides advice for other IDEs and editors including Visual Studio, JetBrains, WebStorm, Gitpod, and Eclipse. Atom also has a node-debug extension.

ndb offers an improved debugging experience with powerful features such as attaching to child processes and script blackboxing so only code in specific folders is shown.

The IBM report-toolkit for Node.js works by analyzing data output when node is run with the --experimental-report option.

Finally, commercial services such as LogRocket and integrate with your live web application in both the client and the server to record errors as they’re encountered by users.

Get Debugging!

Node.js has a range of great debugging tools and code analyzers which can improve the speed and reliability of your application. Whether or not they can tempt you away from console.log() is another matter!